Skip to content
NanoLam™ Capacitor Technology

NanoLam Powered™ self-healing capacitors deliver superior energy density, extreme temperature operation, and super-low inductance for power electronics designed to operate reliably at the limit.

Performance

Energy Density> 5x

Energy density can be greater than 5-times that of conventional polypropylene film and certain ceramic capacitors. The same job in a fraction of the volume and weight.

Temperature> 140°C

Most packaged NanoLam™ capacitors are designed to operate at 140°C — NanoLam thermoset dielectrics survive temperature exposure up to 200°C.

Inductance> 50%

Smaller form factor, prismatic shape, and stacked layer configuration means up to, and exceeding, 50% reduction in inductance compared to wound film capacitors.

  • Self-Healing

    NanoLam capacitors exhibit excellent self-healing characteristics by design.

  • High Thermal Conductivity

    Greater than 2x higher compared to traditional film capacitors.

  • Stable on Bias

    Capacitance does not change as a function of voltage.

  • Stable Across Temperature

    Capacitance varies ±5% across temperature ranging from cryogenic to > 140°C.

  • Fail Open Mode

    NanoLam capacitors do not short. Failure mode is capacitance loss over time.

  • Material Toughness

    Dielectrics are formulated for handling high mechanical stress (vibration and impact).

  • Super Lightweight

    Up to 90% lighter-weight than ceramic capacitors.

  • No Derating with Temperature

    NanoLam thermoset dielectrics maintain dielectric strength across a broad temperature range.

  • Radiation Hardened

    Tested to 5 Mrad(Si) total ionizing dose (Co-60) with capacitance stable to within about 5%.

Technology

NanoLam capacitors consist of thousands of dielectric layers that are formed inline with the electrode deposition process. The result is a self-supported nanolaminate capacitor material.

  1. 01Layer Deposition. Thousands of dielectric and electrode layers are formed in a single machine to form the nanolaminate.
  2. 02Elements. The nanolaminate is processed to create a functioning NanoLam element. Each element is tested before incorporating into a finished capacitor product.
  3. 03Assembly. NanoLam elements are stacked and connected in parallel to form blocks, which are further processed to create finished capacitors.
Eight NanoLam elements stacked into a block, joined by sprayed metal along both ends
Scanning electron micrograph of NanoLam layers: evenly spaced thin bright lines on a grey ground
NanoLam™ layers · SEM ×11,000
Products

A ThermoLink capacitor, a black rectangular package with the PolyCharge mark
DC Link | DC Filtering

ThermoLink™

Compact, lightweight and low profile, with 140°C operation and no voltage derating. Self-healing and fail-open, ideally suited to high-frequency switching in next-generation SiC inverters.

Voltage
170 VDC to 1 kV
Capacitance
8 µF to 94 µF
Energy
Up to 12.5 J
Temperature Range
−40°C to 140°C+
Electrolytic Alternative

PicachoCAP

Designed for lower-voltage applications (< 150 V) where energy density and current demands are high. Ideally suited where electrolytic capacitors are current-constrained, driving the need for higher capacitance.

Very low ESR, self-healing, and no liquid electrolyte mean high current capability, safe operation, and long life.

Ceramic Alternative

KofaCAP

High voltage, above 1 kV, to replace ceramic in applications where weight, volume, and fail-open are absolutely mission-critical.

A custom NanoLam capacitor module with copper bus bars and multiple terminals
Application specific

Custom

Designed to your specification: voltage, capacitance, form factor and environment, from first prototype through qualified production.

Applications

  • A heavy-lift rocket at launch
    Mission-critical systems

    Defense and Space

    From missile guidance to satellite power electronics: firing, fusing and pulsed power in systems that get one chance to work.

  • The nose of a jet aircraft
    Aircraft to avionics

    Aerospace

    High ripple current in a compact, light package that holds up across the extremes of altitude and temperature.

  • A loaded mining haul truck
    Heavy machinery and vehicles

    Industrial

    Trains, cranes, trucks and military vehicles: power electronics that keep running in heat, dust and vibration.

  • A single-seat racing car, front view
    On track in Formula 1

    Motorsports

    4 out of 5 cars on the F1 circuit choose NanoLam — where every gram counts and performance is paramount.

  • A charging connector plugged into an electric car
    Inverters and chargers

    Automotive

    Inverters, DC-DC converters, and onboard and offboard chargers. Wherever size and efficiency matter.

  • A gloved hand holding a defibrillator paddle
    Defibrillation

    Medical

    Defibrillators need high energy, fast recharge and reliability in a package small enough to wear.

Working with

Request Information

How Can We Help?

Tell us about your application, and one of our application specialists will get back to you as soon as possible.